In this video, we unbox our very own Electric Nail File. If you do your nails at home, this tool makes your manicure routine much easier.
Products used in this guide:
Guide
The Nailster Electric Nail File is both stylish and functional. It helps streamline every step where you would normally use a handheld nail file. The electric nail file is suitable for product removal as well as preparing the natural nail.
Our nail file has been developed with a focus on performance and comfort. It is designed to fit comfortably in your hand during use, which is why we have added a textured area to the handle. The electric nail file can run at speeds between 1,000 and 35,000 revolutions per minute.
When you purchase our electric nail file, it includes a handpiece that connects to the machine, a holder for the handpiece, and four different bits.
Mandrel Bit: This bit is used together with our Sanding Bands. A Sanding Band is placed onto the Mandrel Bit and can easily be replaced when it becomes worn. One Sanding Band (180 grit) is included when you receive your Electric Nail File. It can be used for product removal, and if you purchase additional Sanding Bands, they can also be used to prepare the natural nail. Our Sanding Bands can be used 3-4 times before they need to be replaced.
Diamond Bit: This bit is used to prepare the natural nail close to the cuticle. The blue ring on the bit indicates that it has a medium grit.
Cone-Shaped Bit: This bit is used to prepare the natural nail and to remove product along the edge of the nail. It can also be used to remove dead skin cells from the skin around the nail, leaving a clean, refined finish.
Ball-Shaped Bit: This bit is also used to prepare the natural nail and can remove dead skin cells around the nail for a clean, well-groomed finish.
When changing a bit on the electric nail file, turn the handpiece to the left until you hear a click. This means the chuck is open, and you can now insert the desired bit. Once the bit has been inserted, turn the handpiece to the right to secure it.
It is important that the electric nail file is turned off when changing a bit.
On the electric nail file, you will find four touch buttons that light up on the display when the machine is turned on.
The first button is used to turn the machine on and off.
The second is the rotation button. Our electric nail file can rotate in both directions, making it easy to file evenly, no matter which hand you are working on.
The last two buttons control the speed – “min” for lower speed and “max” for higher speed. There are 35 different RPM levels in total.